| Model |
4005 STRIP-CUT |
4005 CROSS-CUT |
4005 CROSS-CUT |
4005 SMC HIGH SECURITY |
|
Strip width (strip-cut)
Particle size (cross-cut/ high capacity) |
1/4" (6 mm) |
3/16" x 1 1/2"
(4 x 40 mm) |
3/32" x 5/8"
(2 x 15 mm) |
1/32" x 3/16"
(.8 x 5 mm) |
| Sheet Capacity (may vary due to variations in paper & power supply) |
50 - 52 |
30 - 32 |
18 - 20 |
12 - 16 |
| Shred Speed |
40 ft./min. |
30 ft./min. |
30 ft./min. |
44 ft./min. |
| Security Level |
level 2 |
level 3 |
level 4 |
level 6 |
| Shred capabilities (non-paper) |
staples, paper clips, credit cards, cd's |
staples, paper clips, credit cards, cd's |
staples, paper clips, credit cards, cd's |
- |
-
SPS® (Safety Protection System) package: electronically controlled, transparent safety shield in the feed opening; "Easy Switch" control element uses color codes and back-lit symbols to indicate operational status; automatic reverse and power cut-off (avoids paper jams); automatic power cut-off when shred bag is full or when cabinet door is opened; double protection against overheating; Energy Saving Mode (ESM) after 1 hour of inactivity
-
automatic start and stop controlled by photo cell
-
ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
-
automatic oil injection ensures optimal performance at all times
-
wide, 16" feed opening
-
high quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs (strip-cut and cross-cut models)
-
super micro-cut model (4014-2 SMC in US / 4005 SMC in Canada) meets all NSA/CSS specifications and is DOD approved
-
lifetime warranty on the cutting shafts (strip-cut and cross-cut models)
-
1 year warranty on SMC cutting shafts
-
quiet and powerful single phase motor rated for continuous operation
-
sturdy "twin drive system" with dust-proof gear box housing
- high quality wooden cabinet mounted on casters
-
pull-out bag frame mechanism mounted on rollers for easy replacement of disposable shred bags (SMC model equipped with shred bin)
-
59 gallon shred volume (approximate)
-
Feed opening: 16"
-
Maximum horsepower: 2 1/8
-
Motor output: 1.6 KW
-
Electrical requirements: 115 V (20 amp. dedicated line required)
-
Dimensions (D x W x H): 23 1/4" x 25 1/4" x 39 3/4"
-
Shipping weight: 343 lbs. (strip-cut) / 378 lbs. (cross-cut)
|
